Brush Hogging
Brush Hogging
The John Deere MX6 Rotary Cutter is a medium-duty, high-performance brush hog built for estate management, pasture reclamation, and clearing untamed hunting land. It quickly slices through thick, overgrown brush and saplings up to 2 inches in diameter.
Engineered Strengths & Specifications
- 72-Inch (6-Foot) Cutting Width: Covers a wide swath that easily clears the wheel footprint of our 4066R tractor, allowing for fast, efficient clearing of wide acres.
- Cutting Height Range: Adjustable from 2 inches to 12 inches, controlled precisely by the tractor’s 3-point hitch and a heavy-duty, puncture-proof rear tailwheel.
- 2-Inch Cutting Capacity: Equipped with high-mass, heat-treated suction blades that generate incredible tip speeds to cleanly slice through brush and hard-wood saplings up to 2 inches in diameter.
- Front and Rear Chain Shield Deflectors: Heavy-duty steel safety chains encircle the deck to deflect flying debris, stones, and wood chunks downward safely.
Jobs & Projects This Attachment Completes
- Pasture & Acreage Reclamation: Shreds waist-high weeds, thick briars, thistles, and invasive grasses to restore neglected farmland or overgrown homestead pastures.
- Hunting Trail & Shooting Lane Cutting: Slices clean access roads through dense woods, creates walking paths to deer stands, and clears low-visibility shooting lanes for hunters and hunting clubs.
- Food Plot Perimeter Clears: Clears the initial dense brush around the outer borders of new deer food plots so the ground can later be turned over with our RT3073 tiller.
- Orchard & Right-of-Way Maintenance: Safely mows under major tree canopies, manages fence lines, and maintains clear utility easement paths.
Mandatory Land Preparation & Access Requirements
To prevent damage to our equipment, ensure operator safety, and deliver a clean cut, customers must fulfill the following site preparation requirements prior to our arrival:
- Easy Machine Access: The work area must feature an entry point at least 7 feet wide, free of low-hanging overhead limbs (under 9 feet) or deep mud bogs that would trap the tractor or transport trailer.
- Debris Pick-Up & Walking Sweep: The customer must walk the property and manually remove all large loose stones, heavy logging chains, scrap metal, old car parts, concrete blocks, and T-posts.
- Stump & Obstacle Marking: Any hidden structural hazards that cannot be moved—such as large rocks, well heads, surveyor stakes, or low-cut tree stumps exceeding 3 inches in height—must be clearly marked with bright flagging tape or safety cones.
Operational Limitations
- Not a Tree Feller: While it eats through 2-inch saplings, it cannot clear mature trees, heavy hardwood brush over 2 inches thick, or established forestry wood lots.
- No Marsh or Wetland Mowing: For safety and ecological preservation, we cannot operate the heavy MX6 cutter in saturated wetlands, standing water, or deep, swampy peat moss.
- No Steep Drop-Offs: We do not operate on dangerous vertical banks, retaining wall edges, or extreme dam inclines that pose a machine rollover hazard.